Magnesium acetate tetrahydrate
(Synonyms: 四水醋酸镁) 目录号 : GC64754
Magnesium acetate tetrahydrate 是无水醋酸镁盐的水合形式。作为镁的盐形式，乙酸镁是镁的生物可利用形式之一，并形成非常水溶性的化合物。Magnesium acetate tetrahydrate 可作为电解质补充剂或分子生物学实验中的试剂。
Cas No.:16674-78-5
Sample solution is provided at 25 µL, 10mM.
;)
,-1-7$$$37316672.jpg');)
;)
;)
$$$36806353.jpg');)
;33(7)%EF%BC%9A546-561$$$37156877.jpg');)
;)
;)
;)
%201124-1138.$$$35908550.jpg');)
%20766-780.$$$37100057.jpg');)
%20418-432.$$$36893736.jpg');)
%EF%BC%9A-240-255.$$$35108512.jpg');)
533-545$$$36543525.jpg');)
%201-13.$$$36600053.jpg');)
;)
Quality Control & SDS
- View current batch:
- Purity: >97.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Magnesium acetate tetrahydrate is a hydrated form of anhydrous magnesium acetate salt. As a salt form of Magnesium, Magnesium acetate is one of the bioavailable forms of magnesium and forms a very water soluble compound. Magnesium acetate tetrahydrate can be used as an electrolyte supplementation or a reagent in molecular biology experiments[1].
[1]. Krisztian Nemeth, et al. Synthesis and investigation of SiO 2-MgO coated MWCNTs and their potential application. Sci Rep. 2019 Oct 22;9(1):15113.
| Cas No. | 16674-78-5 | SDF | Download SDF |
| 别名 | 四水醋酸镁 | ||
| 分子式 | C4H14MgO8 | 分子量 | 214.45 |
| 溶解度 | 储存条件 | Store at -20°C | |
| General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。 储备液的保存方式和期限：-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。 为了提高溶解度，请将管子加热至37℃，然后在超声波浴中震荡一段时间。 |
||
| Shipping Condition | 评估样品解决方案：配备蓝冰进行发货。所有其他可用尺寸：配备RT，或根据请求配备蓝冰。 | ||
| 制备储备液 | |||
 |
1 mg | 5 mg | 10 mg |
| 1 mM | 4.6631 mL | 23.3155 mL | 46.6309 mL |
| 5 mM | 0.9326 mL | 4.6631 mL | 9.3262 mL |
| 10 mM | 0.4663 mL | 2.3315 mL | 4.6631 mL |
| 第一步：请输入基本实验信息（考虑到实验过程中的损耗，建议多配一只动物的药量） | ||||||||||
| 给药剂量 | mg/kg |  |
动物平均体重 | g | |
每只动物给药体积 | ul | |
动物数量 | 只 |
| 第二步：请输入动物体内配方组成（配方适用于不溶于水的药物；不同批次药物配方比例不同，请联系GLPBIO为您提供正确的澄清溶液配方） | ||||||||||
| % DMSO % % Tween 80 % saline | ||||||||||
| 计算重置 | ||||||||||
计算结果:
工作液浓度： mg/ml；
DMSO母液配制方法： mg 药物溶于 μL DMSO溶液（母液浓度 mg/mL，
体内配方配制方法：取 μL DMSO母液，加入 μL PEG300，混匀澄清后加入μL Tween 80，混匀澄清后加入 μL saline，混匀澄清。
1. 首先保证母液是澄清的；
2.
一定要按照顺序依次将溶剂加入，进行下一步操作之前必须保证上一步操作得到的是澄清的溶液，可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Thermal dehydration of Magnesium acetate tetrahydrate: formation and in situ crystallization of anhydrous glass
J Phys Chem B 2012 Dec 13;116(49):14477-86.PMID:23157569DOI:10.1021/jp3052517.
The kinetics and mechanism of the thermal dehydration of Magnesium acetate tetrahydrate were investigated as a typical example of the glass formation process via the thermal decomposition of solids. Formation of an intermediate fluid phase was identified as the characteristic phenomenon responsible for the formation of anhydrous glass. Thermal dehydration from the surface fluid layer regulates the zero-order-like rate behavior of the mass-loss process with an apparent activation energy E(a) ≈ 70-80 kJ mol(-1). Because of variations in the mechanism of release of the water vapor with changes in the reaction temperature range, the mass-loss behavior is largely dependent on the particle size of the sample and heating conditions. The formation of hollow anhydrous glass is the novel finding of the present study. The mechanism of formation is discussed in terms of complementary interpretations of the morphological changes and kinetic behavior of the thermal dehydration. On further heating, the as-produced anhydrous glass exhibits a glass transition phenomenon at approximately 470 K with an E(a) ≈ 550-560 kJ mol(-1), and subsequently crystallizes via the three-dimensional growth of nuclei controlled by diffusion. The crystallization process is characterized by an E(a) ≈ 280 kJ mol(-1) and an enthalpy change ΔH = -13.3 kJ mol(-1), resulting in the formation of smaller, rounded particles of crystalline anhydrate.
Methanolysis of Poly(lactic Acid) Using Catalyst Mixtures and the Kinetics of Methyl Lactate Production
Polymers (Basel) 2022 Apr 26;14(9):1763.PMID:35566932DOI:10.3390/polym14091763.
Polylactic acid (PLA) is a leading bioplastic of which the market share is predicted to increase in the future; its growing production capacity means its end-of-life treatment is becoming increasingly important. One beneficial disposal route for PLA is its chemical recycling via alcoholysis. The alcoholysis of PLA leads to the generation of value-added products alkyl lactates; this route also has potential for a circular economy. In this work, PLA was chemically recycled via methanolysis to generate methyl lactate (MeLa). Four commercially available catalysts were investigated: zinc acetate dihydrate (Zn(OAc)2), Magnesium acetate tetrahydrate (Mg(OAc)2), 4-(dimethylamino)pyridine (DMAP), and triazabicyclodecene (TBD). Dual catalyst experiments displayed an increase in reactivity when Zn(OAc)2 was paired with TBD or DMAP, or when Mg(OAc)2 was paired with TBD. Zn(OAc)2 coupled with TBD displayed the greatest reactivity. Out of the single catalyst reactions, Zn(OAc)2 exhibited the highest activity: a higher mol% was found to increase reaction rate but plateaued at 4 mol%, and a higher equivalent of methanol was found to increase the reaction rate, but plateaued at 17 equivalents. PLA methanolysis was modelled as a two-step reversible reaction; the activation energies were estimated at: Ea1 = 25.23 kJ∙mol-1, Ea2 = 34.16 kJ∙mol-1 and Ea-2 = 47.93 kJ∙mol-1.
Synthesis and investigation of SiO2-MgO coated MWCNTs and their potential application
Sci Rep 2019 Oct 22;9(1):15113.PMID:31641251DOI:10.1038/s41598-019-51745-1.
In the present publication, multiwalled carbon nanotubes (MWCNT) coated with SiO2-MgO nanoparticles were successfully fabricated via sol-gel method to facilitate their incorporation into polymer matrices. Magnesium acetate tetrahydrate and tetraethyl orthosilicate were used as precursors. The coated MWCNTs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectroscopy methods. These investigation techniques verified the presence of the inorganic nanoparticles on the surface of MWCNTs. Surface coated MWCNTs were incorporated into polyamide (PA), polyethylene (PE) and polypropylene (PP) matrices via melt blending. Tensile test and differential scanning calorimetry (DSC) investigations were performed on SiO2-MgO/MWCNT polymer composites to study the reinforcement effect on the mechanical and thermal properties of the products. The obtained results indicate that depending on the type of polymer, the nanoparticles differently influenced the Young's modulus of polymers. Generally, the results demonstrated that polymers treated with SiO2-MgO/MWCNT nanoparticles have higher modulus than neat polymers. DSC results showed that nanoparticles do not change the melting and crystallization behavior of PP significantly. According to the obtained results, coated MWCNTs are promising fillers to enhance mechanical properties of polymers.
Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis
Electrophoresis 2021 Sep;42(17-18):1790-1799.PMID:33502037DOI:10.1002/elps.202000307.
Besides the racemate, the S-enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S-Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg2+ , Ca2+ , or Zn2+ ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused-silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM Magnesium acetate tetrahydrate, and 35 mM heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) as chiral selector. The quantification of R-Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68-5.49% R-Ibu (R2 = 0.999), recovery was found to range between 97 and 103%, the RSD of intra- and interday precision below 2.5%, and the limit of quantification for R- in S-Ibu was calculated to be 0.21% (extrapolated) and 0.15% (dilution of racemic ibuprofen), respectively. Isomerization of S-Ibu was observed under basic conditions by applying long milling times and high milling frequencies.
Optimisation of a sol-gel synthesis route for the preparation of MgF2 particles for a large scale coating process
Dalton Trans 2015 Dec 7;44(45):19501-8.PMID:26402297DOI:10.1039/c5dt02196k.
A synthesis route for the preparation of optically transparent magnesium fluoride sols using Magnesium acetate tetrahydrate as precursor is described. The obtained magnesium fluoride sols are stable for several months and can be applied for antireflective coatings on glass substrates. Reaction parameters in the course of sol synthesis are described in detail. Thus, properties of the precursor materials play a crucial role in the formation of the desired magnesium fluoride nanoparticles, this is drying the precursor has to be performed under defined mild conditions, re-solvation of the dried precursor has to be avoided and addition of water to the final sol-system has to be controlled strictly. Important properties of the magnesium fluoride sols like viscosity, particle size distribution, and structural information are presented as well.