Ammonium iron(II) sulfate
(Synonyms: ammoniumironsulfate; ammoniumironsulfate(2:2:1); diammoniumferroussulfate; diammoniumironbis(sulphate); diammoniumironsulfate; ferrousdiammoniumdisulfate; Sulfuricacid,ammoniumiron(2+)salt(2:2:1); sulfuricacid,ammoniumiron(2++)salt(2:2:1)) 目录号 : GC20135
Cas No.:10045-89-3
Sample solution is provided at 25 µL, 10mM.
Quality Control & SDS
- View current batch:
Cas No. | 10045-89-3 | SDF | |
别名 | ammoniumironsulfate; ammoniumironsulfate(2:2:1); diammoniumferroussulfate; diammoniumironbis(sulphate); diammoniumironsulfate; ferrousdiammoniumdisulfate; Sulfuricacid,ammoniumiron(2+)salt(2:2:1); sulfuricacid,ammoniumiron(2++)salt(2:2:1) | ||
分子式 | Fe.(NH4)2.(SO4)2 | 分子量 | 284.05 |
溶解度 | 储存条件 | ||
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
制备储备液 | |||
1 mg | 5 mg | 10 mg | |
1 mM | 3.5205 mL | 17.6025 mL | 35.2051 mL |
5 mM | 0.7041 mL | 3.5205 mL | 7.041 mL |
10 mM | 0.3521 mL | 1.7603 mL | 3.5205 mL |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
The enzyme-induced formation of iron hybrid nanostructures with different morphologies
Nanoscale 2020 Jun 25;12(24):12917-12927.PMID:32525190DOI:10.1039/d0nr03142a.
A new synthesis method for tailor-made iron-hybrid nanoparticles has been carried out for the first time using enzymes, which directly induce the formation of inorganic iron species. The role of the protein was critical for the formation and morphology of the iron nanostructures and, depending on the enzyme, by simple mixing with Ammonium iron(II) sulfate at room temperature and under air, it was possible to obtain, for the first time, well stabilized superparamagnetic iron and iron oxide nanorods, nanosheets and nanorings or even completely amorphous non-magnetic iron structures in the protein network. These iron nanostructure-enzyme hybrids showed excellent results as heterogeneous catalysts in organic chemistry (chemoselective hydrogenation and C-C bonding formation) and environmental remediation processes.
Pencil it in: pencil drawn electrochemical sensing platforms
Analyst 2016 Jun 20;141(13):4055-64.PMID:27271819DOI:10.1039/c6an00402d.
Inspired by recent reports concerning the utilisation of hand drawn pencil macroelectrodes (PDEs), we report the fabrication, characterisation (physicochemical and electrochemical) and implementation (electrochemical sensing) of various PDEs drawn upon a flexible polyester substrate. Electrochemical characterisation reveals that there are no quantifiable electrochemical responses upon utilising these PDEs with an electroactive analyte that requires an electrochemical oxidation step first, therefore the PDEs have been examined towards the electroactive redox probes hexaammineruthenium(iii) chloride, potassium ferricyanide and Ammonium iron(II) sulfate. For the first time, characterisation of the number of drawn pencil layers and the grade of pencil are examined; these parameters are commonly overlooked when utilising PDEs. It is demonstrated that a PDE drawn ten times with a 6B pencil presented the most advantageous electrochemical platform, in terms of electrochemical reversibility and peak height/analytical signal. In consideration of the aforementioned limitation, analytes requiring an electrochemical reduction as the first process were solely analysed. We demonstrate the beneficial electroanalytical capabilities of these PDEs towards p-benzoquinone and the simultaneous detection of heavy metals, namely lead(ii) and cadmium(ii), all of which are explored for the first time utilising PDEs. Initially, the detection limits of this system were higher than desired for electroanalytical platforms, however upon implementation of the PDEs in a back-to-back configuration (in which two PDEs are placed back-to-back sharing a single connection to the potentiostat), the detection limits for lead(ii) and cadmium(ii) correspond to 10 μg L(-1) and 98 μg L(-1) respectively within model aqueous (0.1 M HCl) solutions.
Flow injection kinetic spectrophotometric determination of trace amounts of Se(IV) in seawater
Talanta 2005 May 15;66(4):1012-7.PMID:18970085DOI:10.1016/j.talanta.2005.01.029.
A simple, accurate, sensitive and selective flow injection catalytic kinetic spectrophotometric method for rapid determination of trace amounts of selenium is proposed in this paper. The proposed method is based on the accelerating effect of Se(IV) on the reaction of ethexlenediamine tetrecetic acid disodium salt (EDTA) and sodium nitrate with Ammonium iron(II) sulfate hexahydrate in acidic media. The absorbance intensity was registered in this reaction solution at 440nm. The calibration graph is linear in the range of 5x10(-9)-2x10(-7) and 2x10(-7)-2x10(-6)gml(-1). The detection limit is 2x10(-9)gml(-1). The relative standard deviation was 3.4% for 5x10(-8)gml(-1) Se(IV) (n=11), 2.7% for 5x10(-7)gml(-1) Se(IV) (n=11). This method is very simple, rapid and suitable for automatic and continuous analysis. The presented system has been applied successfully to determination of Se(IV) of seawater samples.
Bivoltametric titrations using electrodes with innovative geometry
Anal Bioanal Chem 1996 Sep;356(3-4):192-6.PMID:15048351DOI:10.1007/s0021663560192.
Electrodes with different surface areas were investigated for the determination of reversible, quasireversible, irreversible or electroinactive substrates. Two kinds of electrodes were constructed, a helical electrode with a given asymmetry and a platinum array electrode with a variable area. These electrodes were applied for the cerimetry of Ammonium iron(II) sulfate and for the bromatometry of various organic substances. The theoretically derived effects on the shape of the voltametric titration curve are verified experimentally. It is possible to sharpen one side of the peak and to broaden the other side, depending on the system and the side of the peak one is interested in. It is possible to improve the bivoltametric determination of hydroquinone, benzocaine and sulfaguanidine by bromatometry by the directed employment of electrodes of different areas. For the bromatometric determination of electrochemically irreversible substrates the use of the electrode geometries proposed is a way to obtain a sharp bend and a steep decrease of titration curves with low values of the constant current which is a basic requirement for the accuracy.