Acetocarmine Solution
(Synonyms: Acetocarmine Stain solution) 目录号 : GC26426醋酸洋红(Acetocarmine, Aceto-Carmine);是一种较常用的碱性染料,常用于细胞核染色、染色体的固定和染色。
Sample solution is provided at 25 µL, 10mM.
Acetocarmine (Aceto Carmine) is a commonly used alkaline dye used for nuclear staining, chromosome fixation, and staining. To observe the mitosis of plant cells, chromosomes need to be stained with alkaline solution, and acetic acid magenta or gentian violet staining solution can be chosen. To observe whether the pollen is in the mononuclear stage, acetic acid carmine can be used for pollen detection.
Acetic acid carmine solution, also known as acetic acid carmine staining solution or acetic acid carmine staining solution, is mainly composed of high concentrations of acetic acid, carmine, etc., with an acidic pH value. Mainly used for staining the nucleus of samples such as pollen, animal and plant tissue slices, and can also be used for mitochondrial staining.
注意事项
1)本品每次使用后需拧紧盖子密闭保存,否则染色效率会降低。
2)本品含弱酸具刺激性气味,请做好防护措施。
3)为了您的安全和健康,请穿实验服并戴一次性手套操作。
操作步骤(仅作参考)
1、对于花粉类颗粒
取少量花粉置于载玻片,滴加适量醋酸洋红染色液,充分混合,即刻盖片染色10~30min,吸去多余液体,立即在显微镜下观察。
2、对于动植物切片
常规处理切片(比如:脱蜡至水),滴加适量醋酸洋红染色液染色5~20min,自来水冲洗,封片,立即在显微镜下观察。
3、对于部分新鲜植物组织(如:洋葱表皮)
直接浸染于醋酸洋红染色液5~20min,自来水冲洗2~3min,置于载玻片并盖上盖玻片,立即在显微镜下观察。
[注意]:若染色效果不佳,请在酒精灯上迅速来回轻烤几次,目的破坏染色质,从而使得细胞核着色。
Cas No. | N/A | SDF | |
别名 | Acetocarmine Stain solution | ||
分子式 | 分子量 | ||
溶解度 | 储存条件 | Store at RT,protect from light | |
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Quality Control & SDS
- View current batch: