Home>>Signaling Pathways>> Microbiology & Virology>> Fungal>>Magnesium silicate

Magnesium silicate Sale

(Synonyms: 硅酸镁,Activated magnesium silicate) 目录号 : GC64736

Magnesium silicate (Activated magnesium silicate) 是氧化镁 (MgO) 和二氧化硅 (SiO2) 的化合物。Magnesium silicate 用于抗酸剂和抗溃疡剂的制备,也用作除臭剂,脱色剂和抗真菌剂。

Magnesium silicate Chemical Structure

Cas No.:1343-88-0

规格 价格 库存 购买数量
5 g
¥450.00
现货

电话:400-920-5774 Email: sales@glpbio.cn

Customer Reviews

Based on customer reviews.

Sample solution is provided at 25 µL, 10mM.

产品文档

Quality Control & SDS

View current batch:

产品描述

Magnesium silicate (Activated magnesium silicate) is a compound of magnesium oxide (MgO) and silicon dioxide (SiO2). Magnesium silicate is used in antiacid and antiulcer preparation, and as a deodorizer, decolorizer and antifungal[1].

Chemical Properties

Cas No. 1343-88-0 SDF Download SDF
别名 硅酸镁,Activated magnesium silicate
分子式 MgO3Si 分子量 100.39
溶解度 储存条件 Store at -20°C
General tips 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。
为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。
Shipping Condition 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。

溶解性数据

制备储备液
1 mg 5 mg 10 mg
1 mM 9.9612 mL 49.8058 mL 99.6115 mL
5 mM 1.9922 mL 9.9612 mL 19.9223 mL
10 mM 0.9961 mL 4.9806 mL 9.9612 mL
  • 摩尔浓度计算器

  • 稀释计算器

  • 分子量计算器

质量
=
浓度
x
体积
x
分子量
 
 
 
*在配置溶液时,请务必参考产品标签上、MSDS / COA(可在Glpbio的产品页面获得)批次特异的分子量使用本工具。

计算

动物体内配方计算器 (澄清溶液)

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
给药剂量 mg/kg 动物平均体重 g 每只动物给药体积 ul 动物数量
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方)
% DMSO % % Tween 80 % saline
计算重置

Research Update

Magnesium silicate

Profiles Drug Subst Excip Relat Methodol 2011;36:241-85.PMID:22469264DOI:10.1016/B978-0-12-387667-6.00007-5.

A comprehensive profile of Magnesium silicate with 80 references is reported. A full description including nomenclature, formulae, and appearance is included. Methods for Magnesium silicate preparation including precipitation, hydrothermal precipitation, and mechanochemical dehydration are reviewed. Physical characteristics, compendia and non-compendia analytical methods, uses, stability and incompatibilities, biodegradability, toxicity, and substances related to Magnesium silicate are also discussed.

The integrity of synthetic Magnesium silicate in charged compounds

Sci Rep 2021 Dec 9;11(1):23717.PMID:34887472DOI:10.1038/s41598-021-02930-8.

Magnesium silicate is an inorganic compound used as an ingredient in product formulations for many different purposes. Since its compatibility with other components is critical for product quality and stability, it is essential to characterize the integrity of Magnesium silicate in different solutions used for formulations. In this paper, we have determined the magnitude of dissociation of synthetic Magnesium silicate in solution with positively charged, neutral, and negatively charged compounds using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and Liquid Chromatography-High Resolution Mass Spectrometry (LC-HRMS). The EDS results were verified through Monte Carlo simulations of electron-sample interactions. The compounds chosen for this study were positively charged cetylpyridinium chloride (CPC), neutral lauryl glucoside, and negatively charged sodium cocoyl glutamate and sodium cocoyl glycinate since these are common compounds used in personal care and oral care formulations. Negatively charged compounds significantly impacted Magnesium silicate dissociation, resulting in physio-chemical separation between magnesium and silicate ions. In contrast, the positively charged compound had a minor effect on dissociation due to ion competition, and the neutral compound did not have such an impact on Magnesium silicate dissociation. Further, when the magnesium ions are dissociated from the synthetic Magnesium silicate, the morphology is changed accordingly, and the structural integrity of the synthetic Magnesium silicate is damaged. The results provide scientific confidence and guidance for product development using synthetic Magnesium silicate.

Final report on the safety assessment of aluminum silicate, calcium silicate, magnesium aluminum silicate, Magnesium silicate, magnesium trisilicate, sodium Magnesium silicate, zirconium silicate, attapulgite, bentonite, Fuller's earth, hectorite, kaolin, lithium Magnesium silicate, lithium magnesium sodium silicate, montmorillonite, pyrophyllite, and zeolite

Int J Toxicol 2003;22 Suppl 1:37-102.PMID:12851164doi

This report reviews the safety of Aluminum, Calcium, Lithium Magnesium, Lithium Magnesium Sodium, Magnesium Aluminum, Magnesium, Sodium Magnesium, and Zirconium Silicates, Magnesium Trisilicate, Attapulgite, Bentonite, Fuller's Earth, Hectorite, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite as used in cosmetic formulations. The common aspect of all these claylike ingredients is that they contain silicon, oxygen, and one or more metals. Many silicates occur naturally and are mined; yet others are produced synthetically. Typical cosmetic uses of silicates include abrasive, opacifying agent, viscosity-increasing agent, anticaking agent, emulsion stabilizer, binder, and suspending agent. Clay silicates (silicates containing water in their structure) primarily function as adsorbents, opacifiers, and viscosity-increasing agents. Pyrophyllite is also used as a colorant. The International Agency for Research on Cancer has ruled Attapulgite fibers >5 microm as possibly carcinogenic to humans, but fibers <5 microm were not classified as to their carcinogenicity to humans. Likewise, Clinoptilolite, Phillipsite, Mordenite, Nonfibrous Japanese Zeolite, and synthetic Zeolites were not classified as to their carcinogenicity to humans. These ingredients are not significantly toxic in oral acute or short-term oral or parenteral toxicity studies in animals. Inhalation toxicity, however, is readily demonstrated in animals. Particle size, fibrogenicity, concentration, and mineral composition had the greatest effect on toxicity. Larger particle size and longer and wider fibers cause more adverse effects. Magnesium Aluminum Silicate was a weak primary skin irritant in rabbits and had no cumulative skin irritation in guinea pigs. No gross effects were reported in any of these studies. Sodium Magnesium silicate had no primary skin irritation in rabbits and had no cumulative skin irritation in guinea pigs. Hectorite was nonirritating to the skin of rabbits in a Draize primary skin irritation study. Magnesium Aluminum Silicate and Sodium Magnesium silicate caused minimal eye irritation in a Draize eye irritation test. Bentonite caused severe iritis after injection into the anterior chamber of the eyes of rabbits and when injected intralamellarly, widespread corneal infiltrates and retrocorneal membranes were recorded. In a primary eye irritation study in rabbits, Hectorite was moderately irritating without washing and practically nonirritating to the eye with a washout. Rats tolerated a single dose of Zeolite A without any adverse reaction in the eye. Calcium Silicate had no discernible effect on nidation or on maternal or fetal survival in rabbits. Magnesium Aluminum Silicate had neither a teratogenic nor adverse effects on the mouse fetus. Female rats receiving a 20% Kaolin diet exhibited maternal anemia but no significant reduction in birth weight of the pups was recorded. Type A Zeolite produced no adverse effects on the dam, embryo, or fetus in either rats or rabbits at any dose level. Clinoptilolite had no effect on female rat reproductive performance. These ingredients were not genotoxic in the Ames bacterial test system. In primary hepatocyte cultures, the addition of Attapulgite had no significant unscheduled DNA synthesis. Attapulgite did cause significant increases in unscheduled DNA synthesis in rat pleural mesothelial cells, but no significant increase in sister chromosome exchanges were seen. Zeolite particles (<10 microm) produced statistically significant increase in the percentage of aberrant metaphases in human peripheral blood lymphocytes and cells collected by peritoneal lavage from exposed mice. Topical application of Magnesium Aluminum Silicate to human skin daily for 1 week produced no adverse effects. Occupational exposure to mineral dusts has been studied extensively. Fibrosis and pneumoconiosis have been documented in workers involved in the mining and processing of Aluminum Silicate, Calcium Silicate, Zirconium Silicate, Fuller's Earth, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite. The Cosmetic Ingredient Review (CIR. The Cosmetic Ingredient Review (CIR) Expert Panel concluded that the extensive pulmonary damage in humans was the result of direct occupational inhalation of the dusts and noted that lesions seen in animals were affected by particle size, fiber length, and concentration. The Panel considers that most of the formulations are not respirable and of the preparations that are respirable, the concentration of the ingredient is very low. Even so, the Panel considered that any spray containing these solids should be formulated to minimize their inhalation. With this admonition to the cosmetics industry, the CIR Expert Panel concluded that these ingredients are safe as currently used in cosmetic formulations. The Panel did note that the cosmetic ingredient, Talc, is a hydrated Magnesium silicate. Because it has a unique crystalline structure that differs from ingredients addressed in this safety assessment, Talc is not included in this report.

The preparation of lactoferrin/Magnesium silicate lithium injectable hydrogel and application in promoting wound healing

Int J Biol Macromol 2022 Nov 1;220:1501-1511.PMID:36122774DOI:10.1016/j.ijbiomac.2022.09.126.

The development of novel wound dressings with highly effective antibacterial and accelerating wound healing properties has become the focus of current research. In this study, a novel and injectable lactoferrin (LF)/lithium Magnesium silicate hydrogel (LMSH) was first synthesized through a simple electrostatic interaction method. The physical and biological properties are systematically characterized. The results show that the synthesized LF/LMSH has good antibacterial properties and biocompatibility. More importantly, it can effectively promote wound healing in the rat full-thickness skin wound model after 14 days post-operation, and the healing rate can reach 99.1 %, which is much higher than that of other groups. Meanwhile, histochemical and immunofluorescent staining confirm that the prepared injectable LF/LMSH has good pro-collagen deposition, pro-angiogenic and anti-inflammatory properties. The healed wounds present a consistently thickened epidermis with more follicular and glandular structures, indicating the great potential of the prepared material for wound management.

Barium Oxide Doped Magnesium silicate Nanopowders for Bone Fracture Healing: Preparation, Characterization, Antibacterial and In Vivo Animal Studies

Pharmaceutics 2022 Jul 29;14(8):1582.PMID:36015208DOI:10.3390/pharmaceutics14081582.

Magnesium silicate (MgS) nanopowders doped with barium oxide (BaO) were prepared by sol-gel technique, which were then implanted into a fracture of a tibia bone in rats for studying enhanced in vivo bone regeneration. The produced nanopowders were characterized using X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), scanning electron microscope with energy-dispersive X-ray spectrometry (SEM-EDX) and transmission electron microscope (TEM). Mechanical and bactericidal properties of the nanopowders were also determined. Increased crystallinity, particle diameter and surface area were found to decrease after the BaO doping without any notable alterations on their chemical integrities. Moreover, elevated mechanical and antibacterial characteristics were recognized for higher BaO doping concentrations. Our animal studies demonstrated that impressive new bone tissues were formed in the fractures while the prepared samples degraded, indicating that the osteogenesis and degradability of the BaO containing MgS samples were better than the control MgS. The results of the animal study indicated that the simultaneous bone formation on magnesium biomaterial silicate and barium MgS with completed bone healing after five weeks of implantations. The findings also demonstrated that the prepared samples with good biocompatibility and degradability could enhance vascularization and osteogenesis, and they have therapeutic potential to heal bone fractures.