α-Arbutin
(Synonyms: α-熊果苷; 4-Hydroxyphenyl α-D-glucopyranoside) 目录号 : GC20091A glycosylated hydroquinone with diverse biological activities
Cas No.:84380-01-8
Sample solution is provided at 25 µL, 10mM.
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
α-Arbutin (4-Hydroxyphenyl α-D-glucopyranoside) is emerging as popular and effective skin whiteners, acting as tyrosinase inhibitor.
Cas No. | 84380-01-8 | SDF | |
别名 | α-熊果苷; 4-Hydroxyphenyl α-D-glucopyranoside | ||
分子式 | C12H16O7 | 分子量 | 272.25 |
溶解度 | H2O : 125 mg/mL (459.14 mM; Need ultrasonic) | 储存条件 | -20°C |
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
制备储备液 | |||
1 mg | 5 mg | 10 mg | |
1 mM | 3.6731 mL | 18.3655 mL | 36.7309 mL |
5 mM | 0.7346 mL | 3.6731 mL | 7.3462 mL |
10 mM | 0.3673 mL | 1.8365 mL | 3.6731 mL |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Formulation and Pharmaceutical Evaluation of Extemporaneous α-Arbutin Creams for the Treatment of Melasma
Int J Pharm Compd 2021 Jan-Feb;25(1):62-72.PMID:33503011doi
Concentrated 7% w/w a-arbutin cream was formulated and evaluated using O/W and W/O emulsion bases as an extemporaneous preparation for melasma treatment. Cream bases were formulated with two pH values, 4.0 and 5.5, using a hot process. The stability of the creams was studied for 60 days under three storage conditions (i.e., 2°C to 8°C, 30°C, 40°C). Cream characteristics and all aspects of product stability including physical, chemical, and microbial were investigated. Stability was defined as no dramatic change in color, viscosity, pH, and no visible microbial growth. For stability, at least 90% of the initial a-arbutin concentration quantified by stability-indicating high-performance liquid chromatography must be obtained. It was found that pH had no influence on the a-arbutin or formulations' stability. All formulations had a-arbutin remaining higher than 90% (approximately 92%) after being stored for 60 days in all storage conditions with no significant changes in pH or viscosity. All samples complied with the microbial limits test for nonsterile pharmaceutical preparation for cutaneous products. However, a color change was detected in O/W and W/O emulsions, especially at 40°C storage condition within 28 and 14 days, respectively. Drug crystals were observed in W/O emulsion stored at 2°C to 8°C. Concerning the in vitro drug release, a-arbutin was released from O/W emulsion but not from W/O emulsion. From the above results, the O/W emulsion that was developed in this study can be used as a cream base for concentrated a-arbutin as an extemporaneous preparation. The developed a-arbutin cream prepared using O/W emulsions can be used as an extemporaneous preparation with a beyond-use date of 60 days when stored at room temperature (30°C) and in the refrigerator (2°C to 8°C).