Sodium carboxymethyl cellulose
(Synonyms: 羟甲基纤维素钠) 目录号 : GC30042
Sodiumcarboxymethylcellulose是羧甲基纤维素的钠盐，经常用作粘稠剂，糊剂和阻隔剂。
Cas No.:9085-26-1
Sample solution is provided at 25 µL, 10mM.
Quality Control & SDS
- View current batch:
- Purity: >98.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet
Sodium carboxymethyl cellulose is the sodium salt of cellulose arboxymethyl and frequently used as viscous agent, paste and barrier agent.
References:
[1]. Du XH, et al. Dexamethasone and sodium carboxymethyl cellulose prevent postoperative intraperitoneal adhesions in rats. Braz J Med Biol Res. 2015 Apr;48(4):344-8.
| Cas No. | 9085-26-1 | SDF | |
| 别名 | 羟甲基纤维素钠 | ||
| Canonical SMILES | [Sodium carboxymethyl cellulose] | ||
| 分子式 | 分子量 | ||
| 溶解度 | Water : 16.67 mg/mL | 储存条件 | Store at RT |
| General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。 储备液的保存方式和期限：-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。 为了提高溶解度，请将管子加热至37℃，然后在超声波浴中震荡一段时间。 |
||
| Shipping Condition | 评估样品解决方案：配备蓝冰进行发货。所有其他可用尺寸：配备RT，或根据请求配备蓝冰。 | ||
| 第一步：请输入基本实验信息（考虑到实验过程中的损耗，建议多配一只动物的药量） | ||||||||||
| 给药剂量 | mg/kg |  |
动物平均体重 | g | |
每只动物给药体积 | ul | |
动物数量 | 只 |
| 第二步：请输入动物体内配方组成（配方适用于不溶于水的药物；不同批次药物配方比例不同，请联系GLPBIO为您提供正确的澄清溶液配方） | ||||||||||
| % DMSO % % Tween 80 % saline | ||||||||||
| 计算重置 | ||||||||||
计算结果:
工作液浓度： mg/ml；
DMSO母液配制方法： mg 药物溶于 μL DMSO溶液（母液浓度 mg/mL，
体内配方配制方法：取 μL DMSO母液，加入 μL PEG300，混匀澄清后加入μL Tween 80，混匀澄清后加入 μL saline，混匀澄清。
1. 首先保证母液是澄清的；
2.
一定要按照顺序依次将溶剂加入，进行下一步操作之前必须保证上一步操作得到的是澄清的溶液，可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Sodium carboxymethyl cellulose-based extrafibrillar demineralization to optimize dentin bonding durability
Dent Mater 2022 Dec;38(12):2096-2114.36446650 10.1016/j.dental.2022.11.001
Objective: To investigate the effects of a Sodium carboxymethyl cellulose (SCMC)-based extrafibrillar demineralization conditioner on dentin bonding durability and explore the possible mechanisms. Methods: The SCMC-based extrafibrillar demineralization conditioner was facilely developed by dissolving SCMC into deionized water at an appropriate concentration. A single layer collagen mineralization/demineralization model was designed to visualize extrafibrillar demineralization in detail. Dentin surfaces of human third molars were conditioned with 3 % SCMC or 37 % phosphoric acid (PA). The morphology, composition, and mechanical properties of conditioned dentin from each group were characterized. To evaluate dentin bonding performance, SCMC- and PA- conditioned dentin were applied with adhesive restoration using the dry-bonding technique. The microtensile bond strength (MTBS), interface nanoleakage, and in situ zymography were measured after 24 h of water storage, 10,000 thermocycles, or one month of collagenase aging. The inhibitory effect of SCMC on recombinant human matrix metalloproteinase-2 (rhMMP-2) and cell toxicity were also investigated. Results: After SCMC conditioning, both demineralization of extrafibrillar minerals and retention of intrafibrillar minerals were observed in the single layer collagen model and the dentin ultrastructure. The mechanical properties of SCMC-conditioned dentin were largely preserved. Compared with PA, SCMC conditioning produced greater MTBS values and less nanoleakage expression after aging. Endogenous gelatinolytic activity was suppressed in SCMC-conditioned dentin. In addition to being nontoxic, the inhibition of rhMMP-2 by SCMC was confirmed to be dose-dependent. Significance: From the perspective of minimal intervention, the SCMC-based extrafibrillar demineralization conditioner could improve dentin bonding durability, suggesting a promising strategy to extend the service life of adhesive restorations.
Drug delivery based on chitosan, β-cyclodextrin and Sodium carboxymethyl cellulose as well as nanocarriers for advanced leukemia treatment
Biomed Pharmacother 2022 Sep;153:113369.35780615 10.1016/j.biopha.2022.113369
Medicine/nanotechnology as a new and applicable technique according to drug delivery systems has gained great consideration for cancer treatment. Polysaccharides including, cellulose, β-cyclodextrin and Sodium carboxymethyl cellulose and chitosan as natural bio-materials, are appropriate candidates for designing and formulations of these nanosystems because of the exceptional advantages such as bio-compatibility, bio-degradability, non-toxicity, and gelling characteristics. An intelligent drug delivery platform based on these hybrids nowadays is developed, which can be used for dual-responsive dual-drug delivery. Nanotechnology accompany with biological molecules has been carefully considered to decrease the drawbacks of conventional cancer treatments. Consequently, this review is intended to state and investigate on the latest development on the combination treatment of platforms based on the hybrids of anticancer drugs/nanoparticles/Polysaccharides in the fields of biomedical therapeutics and cancer therapy owing to the bio-compatibility, great surface area, good chemical and mechanical features, the challenges and future perspectives are reported as well.
Synthesis of Sodium carboxymethyl cellulose/Poly(acrylic acid) Microgels via Visible-Light-Triggered Polymerization as a Self-Sedimentary Cationic Basic Dye Adsorbent
Langmuir 2022 Mar 29;38(12):3711-3719.35290066 10.1021/acs.langmuir.1c03196
In this study, Sodium carboxymethyl cellulose/poly(acrylic acid) (CMC/PAA) microgels were successfully synthesized via visible-light-triggered free-radical polymerization to remove methylene blue (MB) from water. The microgels had a loose and porous 3-D network structure, exhibiting excellent adsorption performance. The equilibrium adsorption capacity and the removal efficiency of the microgels reached approximately 1479 mg/g and 97%, respectively, when the initial concentration of MB was 300 mg/L. The adsorption kinetics was well described by the pseudo-second-order model, and the adsorption isotherms followed the Langmuir isothermal model. Notably, CMC/PAA microgels could naturally settle and be separated from the MB solution. Furthermore, the recovery efficiency of the regenerated CMC/PAA microgels reached approximately 94% after five adsorption-desorption cycles. Therefore, the microgels could be used as promising adsorbents due to the advantages of high adsorption capacity, fast removal rate, and reusability.
Preparation and characterization of cassava starch/Sodium carboxymethyl cellulose edible film incorporating apple polyphenols
Int J Biol Macromol 2022 Jul 1;212:155-164.35609834 10.1016/j.ijbiomac.2022.05.121
This study aimed to prepare edible films with cassava starch (CS) and Sodium carboxymethyl cellulose (CMC) as basic raw materials and apple polyphenol (AP) as biologically active components. The addition of AP makes the flexibility of the film increase first and then decrease while the tensile strength decreases slightly and the barrier ability increases significantly. When the AP concentration was 70 mg/mL, the tensile strength of the film decreased from 5.61 ± 0.45 to 3.36 ± 0.19, the water vapor transmittance decreased from 7.17 ± 0.17 to 4.97 ± 0.07 and the peroxide value decreased from 1.896 ± 0.04 to 0.53 ± 0.04. By studying the microstructure of CS/CMC/AP-4 film, it was found that hydrogen bonds were formed between AP, CS, and CMC, and they showed high compatibility, thus improving the crystallinity. On this basis, the roughness of the film decreases and the compactness is enhanced. The increase in compactness is directly related to the increase in blocking ability. At the same time, the improvement of thermal stability is attributed to the increase in crystallinity. In addition, the application of CS/CMC/AP-4 film in chicken preservation also proved its antioxidant potential.
Sodium carboxymethyl cellulose hydrogels containing reduced graphene oxide (rGO) as a functional antibiofilm wound dressing
J Biomater Sci Polym Ed 2019 Jun;30(8):629-645.30896336 10.1080/09205063.2019.1595892
Biofilms comprise bacteria attached to wound surfaces and are major contributors to non-healing wounds. It was found that the increased resistance of biofilms to antibiotics allows wound infections to persist chronically in spite of antibiotic therapy. In this study, the reduced form of graphene oxide (rGO) was explored as plausible antibiofilm agents. The rGO was synthesized via reducing the functional groups of GO. Then, rGO were characterized using zetasizer, X-ray photoelectron spectroscopy, UV-Vis spectroscopy and FESEM. The rGO were then formulated into Sodium carboxymethyl cellulose (NaCMC) hydrogels to form rGO hydrogel and tested for antibiofilm activities in vitro using XTT test, and in vivo biofilm formation assay using nematodes C. elegans. Reduced GO hydrogel was successfully formed by reducing the functional groups of GO, and a reduction of up to 95% of functional groups was confirmed with X-ray photoelectron spectroscopy analysis. XTT tests confirmed that rGO hydrogels reduced biofilm formation by S. aureus (81-84%) and P. aeruginosa (50-62%). Fluorescence intensity also confirmed that rGO hydrogel can inhibit biofilm bacteria in C. elegans experiments. This study implied that rGO hydrogel is an effective antibiofilm agent for infected wounds.