Home>>New Products>>BCA Protein Assay Kit (BCA蛋白浓度测定试剂盒)

BCA Protein Assay Kit (BCA蛋白浓度测定试剂盒)

目录号 : GK10009

BCA Protein Assay Kit是一种即用型总蛋白含量测定试剂盒,检测范围20-2000μg/mL。

BCA Protein Assay Kit (BCA蛋白浓度测定试剂盒) Chemical Structure

规格 价格 库存 购买数量
500T
¥280.00
现货
2500T
¥800.00
现货

电话:400-920-5774 Email: sales@glpbio.cn

Customer Reviews

Based on customer reviews.

Sample solution is provided at 25 µL, 10mM.

162

客户使用产品发表文献 62

产品文档

View current batch:

实验参考方法

以微孔酶标仪检测法为例:

1、以50:1的比例混合BCA试剂A和BCA试剂B。即将50 ml BCA试剂A与1 ml BCA试剂B混合。

注意: 使用以下公式确定所需工作试剂的总量:

(标准品+待测样品) * (重复次数) * (每个样品所需要的BCA工作液) =所需BCA工作液总体积。

2、将25μl的每种标准品和蛋白质样品添加到单独的微孔板孔中。

3、向每个孔中添加200μl BCA工作试剂并混合。

4、密封板并在37℃下孵育30分钟。

5、将板冷却至室温(RT)。

6、在10分钟内在读板器上测量562 nm的吸光度。

7、从所有读数中减去空白的OD562,绘制BSA标准曲线: OD562 (在Y轴上) 对BSA标准浓度 (在X轴上)。

8、使用标准曲线确定每个待测样品的蛋白质浓度。

 

重要产品信息

1.如果将本试剂盒冷藏或存放在冷库中, 则试剂A或试剂B中可能会形成沉淀物。要溶解沉淀物, 请在37°C下缓慢加热溶液, 同时进行混合或微波处理几秒钟. 如果试剂盒被细菌污染, 则将其丢弃。

2.如果样品中仍然存在还原性物质或金属螯合物而引起干扰, 建议使用Bradford分析试剂盒(GK10027)。

3.建议一式两份地测定不同浓度和样品的标准液. 每种测定均应绘制标准曲线。

4.彻底混合试剂A和试剂B后, 新形成的绿色浊度将消失. 它不会影响性能。

5.使用分光光度计检测蛋白质浓度时, 测定的样品量将减少. 使用37°C的培养箱时, 请防止水蒸发的影响。

6.消除或最小化干扰物质影响的几种方法:

•通过透析或凝胶过滤去除干扰物质。

•稀释样品,直到物质不再干扰为止。

•由于高浓度的去污剂也会影响结果, 因此请用三氯乙酸 (TCA) 沉淀样品中的蛋白质。

7,避免使用包括还原性物质, 螯合剂, 强酸和强碱在内的物质, 因为即使浓度很低也会干扰蛋白质的估算。

产品描述

The BCA Protein Assay Kit is a ready-to-use total protein analysis reagent that can quickly determine total protein concentration by measuring the absorbance at 562 nm and comparing it with the absorbance-concentration curve of a protein standard.

This kit is suitable for measuring the total protein content of purified proteins, animal and plant tissue samples, and various cell samples. The detection concentration range is 20-2000 μg/mL. As the protein concentration increases, the absorbance has a linear relationship with the protein concentration.

This kit is developed based on the BCA (Bicin-choninic Acid) method, which enables fast, stable and sensitive concentration determination of protein. The principle is that under alkaline conditions, the protein reduces Cu2+ to Cu+, and Cu+ forms a purple complex with the BCA reagent. This water-soluble complex shows strong absorbance at 562 nm.

If you need to accurately quantify the protein to be tested, it is recommended to choose a protein standard with a quality similar to that of the protein to be tested. For example, when measuring immunoglobulin samples, bovine gamma globulin (BGG) standards can be used.

In addition, this kit provides a series of concentration gradient BSA (Bovine Serum Albumin, bovine serum albumin) standards with a concentration range of 150-2000 μg/mL, eliminating the need for a series of gradient dilution processes and making the detection process faster.

BCA Protein Assay Kit是一种即用型的总蛋白分析试剂, 可通过测量562 nm处的吸光度并与蛋白标准物的吸光度-浓度曲线进行比较, 快速测定总蛋白浓度。

本试剂盒适用于对纯化蛋白、动植物组织样本以及各类细胞样本进行总蛋白含量测定,检测浓度范围20-2000μg/mL。随着蛋白质浓度的增加, 吸光度与蛋白浓度呈线性关系。

本试剂盒是基于BCA (Bicin-choninic Acid) 法研制而成, 实现了对蛋白质进行快速、稳定、灵敏的浓度测定。 其原理是在碱性条件下,蛋白将Cu2+还原成Cu+, Cu+与BCA试剂形成紫色的络合物,这种水溶性复合物在562 nm处表现出很强的吸光度。

如果需要精确定量待测蛋白质, 建议选择质量与待测蛋白质相似的蛋白质标准品。例如, 在测定免疫球蛋白样品时, 可以使用牛γ球蛋白 (BGG) 标准品。

此外,本试剂盒提供一系列浓度梯度的BSA(Bovine Serum Albumin,牛血清白蛋白)标准品,浓度范围150-2000μg/mL,无需进行一系列梯度稀释过程,检测过程更加快捷。

产品组成

Components 500 tests 2500 tests
BCA Reagent A 100mL 100 mL ×5
BCA Reagent B 3mL 3 mL × 5
BSA Protein Standards 2000μg/ml 1mL 1 mL × 5
1500μg/ml 1mL 1 mL × 5
1000μg/ml 1mL 1 mL × 5
750μg/ml 1mL 1 mL × 5
500μg/ml 1mL 1 mL × 5
250μg/ml 1mL 1 mL × 5
150μg/ml 1mL 1 mL × 5
0μg/ml 1mL 1 mL × 5

功能属性

应用&特点蛋白质印迹
蛋白质表达测定
蛋白质分析和表征
蛋白质定量测定
运输方式蓝冰运输.
储存条件试剂A和B, 室温保存一年有效. 蛋白标准室温保存, 一个月有效; 4°C保存, 一年有效; -20°C可以长期保存.
用途仅供研究使用!不能用于人体。